Frame Parts

After-Market Handle Bar Post and Riser Set for Yamaha Zuma 50 scooters. Zuma 50 Handle Bar Post and Riser Specification: Overall Height: 155mm Overall Width: 117mm

Vento Triton main stand.

Thumbscrew to attach handle bar ends on mini-gas and electric scooters. Scooter Thumb screw Specification: Overall Length: 21mm Thread Size: M5x0.80

Temperature Sending Unit for 4-stroke water-cooled engine based scooters, ATVs and off-road karts. Temperature Sending Unit Specifications Thread Size: M16x1.50

Lower Outer Steering Stem Race for 150cc and 125cc GY6 engine based Sport Style scooters. Lower Outer Steering Stem Race Specification: Outer Diameter: 54mm Inner Diameter: 24mm Item is threaded on inside ring

Steering Stem Upper Inner Bearing Race for 150cc and 125cc GY6 engine based Sport Style scooters. Upper Inner Steering Stem Race Specification: Outer Diameter: 45mm Inner Diameter: 27mm

Steering Stem Lower Inner Bearing Race for 150cc and 125cc GY6 engine based Sport Style scooters. Lower Steering Stem Race Specification: Outer Diameter: 62mm Inner Diameter: 51mm This does taper up to 58mm on the bottom side inner diameter Width: 14mm

Upper Outer Steering Stem Race for 150cc and 125cc GY6 engine based Sport Style scooters. Steering ball race, upper, outer Specification: Inner Diameter: 25mm Outer Diameter: 39mm Width: 7mm

Main Center Stand for 150cc and 125cc GY6 engine based Sport Style scooters.

Speedometer Cable Type-1 for 150cc and 125cc GY6 engine based scooters. Speedometer Cable Specifications Overall Length: 38½ inches Cable on threaded end is square (2½ mm)

Spacer used with flanged bolt and nut.

Kickstand , MC-200E

Side Stand for scooter, please check measurements before ordering. Scooter Kick Stand Specification: Overall Length: 9.5 inches Thread Size: M8x1.25

Rubber Boot for Rear Brake Arm found on 150cc and 125cc GY6 engine based scooters.

Rear Muffler for 150cc and 125cc GY6 engine based scooters and vehicles. Rear Muffler Specifications Overall Length: 19 inches Overall Outer Diameter: 112mm Bolt Hole Spacing: 68mm

Razor Pocket Mod Kickstand with Screws for Versions 1 and up.Please Click Here for a guide on how to identify which Razor version you have. Razor Part: W15130640028 Pocket Mod, Version 1+ Includes Mounting Hardware

Radiator Return Hose Clamp for 250cc 4-stroke water-cooled engine based scooters ATVs and off-road karts. Return Hose Clamp Specifications Adj. Diameter 21mm -27mm

Outlaw Racing Products Quick Adjust Clutch Lever for Dirt Bikes, ATVs and Pocket Bikes. Available in Black, Blue and Red. This clutch lever utilizes a precision sealed bearing to ensure smooth action with no slop. It also allows for easier mounting of...

Outlaw Racing Products "ACE" Handlebars in 7/8" Diameter are made from top grade 70-75-T6 aluminum with 5mm walls. They are shot peened and have an anodized finish to increase fatigue life. Pit Posse Outlaw Racing "ACE" Handlebar Specifications: Overall...

Outlaw Racing Products Replacement Lever for the Quick Adjust Clutch Lever. Pit Posse Outlaw Racing Products Clutch Lever Specifications: Overall Length: 170mm (6.7 inches) Mounting Inner Diameter: 7mm