Hall Effect Electric Throttle with Reverse and 3 Speed Switch for electric Scooters, GoKarts and eBikes

Universal twist grip throttle with Reverse Switch and 3 Speed Switch compatible with the Brushed and Brushless Speed Controllers. Throttle needs a speed controller build with those functionalities in order to function as described. The speed controller box must have inputs for reverse and Reverse.

Twist grip throttle Specifications:

• works with 0 - 4 or 0-5 Volt systems
• Variable Speed Electric Throttle 
• 1 switch 2 positions(Forward/Reverse), 1 switch 3 speed positions(High/Medium/low)
• Switch functions depend on controller (not included)

Throttle Wires: Red = positive(+) 5V, Black = Ground(-),  White = speed signal)

F-R: rocker type switch yellow = (F) forward gear (when switch is in the (F) position the switch is off (not making contact) brown = (R) reverse gear (when switch is in the (R) position the switch is (making contact).

3 Speed switch (Switch will connect either 2 cables from the available 3 at any time) Freely test with your controller to obtain the desired result.

NOTE: This is for controllers that have a 3 cable input for 3 speed control

NOTE: This can also be used as a switch for lights, horn, signal, etc *

Alternate uses: The F-R switch could instead be used as an On/Off switch (to control the speed controller on vehicles without a reverse function) When in the (F) position the speed controller would be off & when (switched) to the (R) position the speed controller would be On. (energized) & the Cruise control button could be used for a horn.